Bump 'n' Jump

Arcade 1982 Data East USA (Bally Midway license) Driving
An overhead driving game where you jump or bump enemy cars for points.
Play
Bump 'n' Jump

Partager Bump 'n' Jump

Partager

  • Permalien :

Technique

CPU
  • maincpu DECO C10707 (@ 0 Mhz)
  • audiocpu M6502 (@ 0 Mhz)
Chipset
  • AY-3-8910A (@ 1 Mhz)
  • AY-3-8910A (@ 1 Mhz)
  • DISCRETE
Affichage
  • Orientation Tate
  • Résolution 255 x 240
  • Fréquence 57.444853 Hz
Contrôles
  • Nombre de joueurs 2
  • Nombre de boutons 1
  • Type de contrôle joy (8 ways)

Screenshots de Bump 'n' Jump

Bump 'n' Jump - Screen 1
Bump 'n' Jump - Screen 2
Bump 'n' Jump - Screen 3
Bump 'n' Jump - Screen 4
Bump 'n' Jump - Screen 5

Les clones de Bump 'n' Jump

Scoring de Bump 'n' Jump

Destroying a car : 200, 300 or 500 points, depending on car.
End of stage bonus : 200 + 100 points/level x number of cars destroyed.
Special Bonus : 50000 points for destroying no cars.

Tips sur Bump 'n' Jump

* Bonus Points : if you make it through an entire board without smashing any cars, you'll get a 50000 point bonus.

* You can jump off the edge of the screen and land on the other side. Use this tactic to escape from a tight spot, but only when the track is widest.

* Try not to get caught between three cars, as when you bump one into a wall, chances are the impact will bounce you back into the wall.

Bump 'n' Jump et M.A.M.E.

0.35 [Kevin Brisley]
0.30 [Kevin Brisley]

Artwork available

TEST MODE:
- In test mode, press 5 to advance through the various tests. Burnin' Rubber and Car Action: The service ROM is missing for this one so service mode doesn't work.

WIP:
- 6th September 2010: Mr. Do - Bump 'n' Jump bezel is done, thanks to Kiltron. This was one of my favorite games to play at Eddie's Liquor, back when I was twelve.
- 0.138: Machone fixed incorrect screen resolution for Burnin' Rubber and clones Bump 'n' Jump and Car Action to 240x256.
- 0.129u5: Couriersud fixed low pass filtering on engine and explosion sounds in Burnin' Rubber.
- 0.126u2: Fabio Priuli added DIP locations to clone Bump 'n' Jump.
- 0.112u1: Canim fixed visible area to 240x256 in Bump 'n' Jump according to the arcade picture.
- 26th August 2006: Mr. Do - Added Burning Rubber bezel from MAME.net and Mean Arena. Some of these decent stuff are so-so; some are REALLY good.
- 0.106u3: Added plds ($0, 30 - pal10l8.10k, pal16r4a.2d) to clone Car Action.
- 0.105u3: Added missing proms ($0, 20 - palette, RAS/CAS logic) to clone Car Action.
- 20th April 2006: f205v dumped 2x plds from Car Action.
- 25th December 1999: Zsolt Vasvari fixed clone Bump'n'Jump priority problems.
- 0.35: Changed 'Burnin' Rubber' to parent set.
- 0.33b7: Known issues: The continue clock counts too fast.
- 0.33b1: Changed description to 'Bump 'n' Jump'.
- 0.31: Ivan Mackintosh added clone Car Action (bootleg 1983).
- 0.30: Kevin Brisley added Bump 'n Jump (Data East 1982) and Burnin' Rubber. Known issues: The continue timer runs too fast, this is related to the VBlank input bit timing.
- 1st December 1997: Dumped Burnin' Rubber.

LEVELS: 5 (endless)

Romset: 52 kb / 8 files / 22.1 zip
LoadingChargement en cours
Suivez nous

Réseaux sociaux

Suivez l'actualité de Jamma Play sur vos réseaux sociaux favoris